K72
Share This Article
David Kraus says: K72 trans on a JD x590 what oil should I be using with 400 hours on it
-
ggraham says:
Hello,
Oil for the K72 has two choices that I can recommend. Either the John Deere oil, J20D, or our own Tuff Tech oil. Part number for Tuff Tech is 187Q0899000 for a 3 liter bottle and you will need two of them.
Rick says: I have a 2015 Simplicity tractor with a K72h unit. Is there only one fill spot for both chambers?
-
Hello,
For the K72; both chambers, gear and hydro, do connect under the sealing cap. Filling the external reservoir will technically fill both chambers. However, it can take a while to get the fluid to flow past the magnet, especially if it is cool and the oil is thick. You may be better off popping the sealing cap and pouring the oil directly into the gear chamber. that would be the faster way. to get the gear chamber full.
Eddie Hale 615 519 8058 says: K72 tran john Deere X570.
What flute would you recommend?
-
Hello,
For that transaxle you can either use the John Deere Fluid J20D or you can use our own Tuff Tech Oil. Part number for Tuff Terch is 187Q0899000 for a 3 liter bottle and you would need 2 of them.
john w crotty jr says: I have a k72h transmission in my simplicity mower it had 10 w 30 oil from the factory. what oil do you recommend. I keep Hy guard and Hy guard low viscosity on hand will either of these work?
-
Hello,
Yes, the Hy-Guard low viscocity will work.
Leave a Reply